Pelton Turbine Apparatus (Mini/Medium/Standard)
(MODEL ME-FM-1295/95/97E-R)
The ARL’s 1295E (Small Size), 1296E (Medium Size) & 1297E (Standard Size) Pelton Turbine Apparatus provides a simple low-cost introduction to turbine performance. Available in both Conventional and Digital Instrumentation. And State of the art Data Acquisition System made by the Allied Research Labs with Precise measurement tools and graphs etc.
- Turbine wheel inside cast housing with acrylic panel to enable viewing
- Load/Torque and other measurements are taken by digital measurement devices.
- Inlet pressure gauge
- All Models have its own unique water tank and supply system, however small pelton Turbine can be adjusted with ARL’s Unique Hydraulic Bench upon customer demand.
The Pelton Turbine Models comprises a Pelton wheel with spear-valve arrangement mounted on a support frame, which fits on to the Hydraulics Bench top channel. Mechanical output from the turbine is absorbed using a Dynamometer with digital Instrumentation.
Pressure at the spear valve is indicated on a remote gauge. A non-contacting tachometer may also be used to determine the speed of the Pelton wheel.
Basic principles of the Pelton turbine may be demonstrated and, with appropriate measurements, power produced and efficiency may be determined.
| Item | Value |
| Speed range: | 0-2000 rpm |
| Brake power: | 10W/100W/1000W |
| Pressure gauge range: | 0-25m H2O |
| Force balance range: | 0-20N x 0.2N |
| Number of Pelton buckets: | 16 |
| Diameter of Pelton wheel: | 123mm |
- Determining the operating characteristics, ie power, efficiency and torque, of a Pelton turbine at various speeds
220V~ single Phase 50Hz
Water inlet
Hydraulic bench for small Model of Pelton Turbine on Customer Demand.
Small Pelton Turbine:
| Height: | 0.60m |
| Width: | 0.40m |
| Depth: | 0.30m |
Medium Pelton Turbine:
| Height: | 1.60m |
| Width: | 1.40m |
| Depth: | 0.90m |
Standard Pelton Turbine:
| Height: | 2.60m |
| Width: | 2.50m |
| Depth: | 1.30m |